HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 27 Error Codes — Part Code 1010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iTo change the parameter in
High-Speed mode/MIX
mode, select [OK].
Otherwise, select [Cancel].
The port of a PCB in High
Speed mode/MIX mode is
selected. When changing the
parameter of topology or the
parameter of host speed, the
change will be applied to the
PCB in High Speed
mode/MIX mode. Are you
sure you want to continue this
operation?
90151010
0iSelect [OK] for continuing
processing. Select [Cancel] if
you want to stop.
XP Secure Manager will be
applied to the specified
command device. Do you
want to continue?
90171010
0iThe LUN will not be specified
as a command device. Also,
command device security will
be disabled on the LUN. Do
you want to continue?
90191010
0iDo you want to change?91031010
0iSelect the free LUN.91501010
0iOnly the LUN(LDEV) is
specified. Select the
corresponding LDEV(LUN.)
91511010
5WCheck the settings.The host mode XP External
Storage Software cannot be
specified.
552081010
5WCheck the settings.The host mode XP External
Storage Software cannot be
specified.
552331010
5WTo continue processing, select
[OK]. To stop processing,
select [Cancel].
This action will cause a
failover of resource groups
on the node which is going
to be shutdown if they are
running. Are you sure to
proceed?
552341010
5ETo continue processing, select
[OK]. To stop processing,
select [Cancel].
The setting extends across
multiple SLPRs. Do you want
to continue?
590491010
5ETo continue processing, select
[OK]. To stop processing,
select [Cancel].
The setting extends across
multiple SLPRs. Do you want
to continue?
590501010
0iSelect [OK].The requested operation is
complete. It will take a while
to start NAS OS. Select
[Refresh] to check the NAS
OS status.
590741010
5iSet the host mode option
when it is necessary.
When a host mode option is
set, the value will be set to
default. Set the host mode
option when it is necessary.
591171010
118 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes