HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EIf this problem persists, call
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
585751005
3EIf this problem persists, call
technical support.
A communication time-out
error occurred in the
subsystem. Wait for a while,
and then retry the operation.
585761005
Table 27 Error Codes — Part Code 1010
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCorrect the specified content,
and issue the request again.
(Currently, Bad Value Send
report in Set Response.)
The specified fibre address is
invalid.
10231010
5WCorrect the specified
contents, and request the
setting of the configuration
information again.
The specified host group is
already used.
10651010
5WCorrect the specified content,
and retry.
The specified LDEVs and free
LUNs should be the same
number.
50101010
5WYou cannot specify any more.The number of LU paths in
use has already reached the
maximum (1,024 in a Fibre
Channel environment, 256 in
a NAS environment.
50401010
5WReduce the number, and
retry.
The number of LUNs in use
has already reached the
maximum number of LUNs
that can be specified per host
group (1,024 in a Fibre
Channel environment, 256 in
a NAS environment.)
50411010
5WReduce the number, and
retry.
The number of LUNs in use
has already reached the
maximum number of LUNs
that can be specified per port
(1,024 in a Fibre Channel
environment, 256 in a NAS
environment.)
50421010
5WReduce the number, and
retry.
The selected number of LDEVs
exceeds the number of free
LUNs.
50431010
5WCheck the content of the
operation.
The specified LUN had been
set.
50501010
3ECheck the content of the
operation.
The selected LUN is not a
command device.
50511010
5WCheck the content of the
operation.
Select the LUN that is already
assigned.
50521010
116 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes