HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECheck the setting.The iSCSI name cannot be
set because the number of
iSCSI names exceeds the
maximum that can be set in
a port.
555721005
6ECorrect the settings, and then
retry the operation.
The default nickname cannot
be specified in the nickname
setting of iSCSI name.
555731005
6ECheck the setting.The setting of the specified
port cannot be changed
because the attribute of the
specified port is Initiator or
External.
555741005
6WRegister another name.The specified iSCSI target
name cannot be registered
because the name is reserved
for Target#00.
555911005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing.
If this problem persists, call
technical support.
563011005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing.
If this problem persists, call
technical support.
563021005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing.
If this problem persists, call
technical support.
563031005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing.
If this problem persists, call
technical support.
571011005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing.
If this problem persists, call
technical support.
571021005
6EIf this problem persists, call
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
585721005
3ECheck the DKCMAIN
microcode version and the
SVP microcode version
because these versions might
be mismatched
This function is not supported.585731005
6EIf this problem persists, call
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
585741005
XP Remote Web Console Error Codes 115