HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60121005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60361005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60401005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60501005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
70601005
6ERetry the same operation
several times. If the same
error occurs, call technical
support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
80011005
6EIf this problem persists, call
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
81001005
6ERetry the same operation
several times. If the same
error occurs, call technical
support.
This function is not supported.81021005
6ECheck the settings, and then
retry the operation.
The configuration information
being set does not match the
current configuration
information. Check the
settings, and then retry the
operation.
552061005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
555001005
6ECheck the setting.The specified port is not a
fibre port.
555531005
6ECheck the setting.The specified WWN is not
registered.
555541005
6ECheck the setting.The value of the WWN is not
specified or is set to zero.
555551005
6ECheck the setting.The specified port is not an
iSCSI port.
555561005
6ECheck the setting.The specified iSCSI name is
not registered.
555571005
XP Remote Web Console Error Codes 113