HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
10281005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10291005
2EReserve volume of XP Auto
LUN or On Demand volume
is included to a volume which
links as an expanded LU. The
error does not occur normally
because it is guarded in the
screen. Contact the program
maker.
An error occurred. If this
problem persists, call
technical support.
10501005
2EYou are trying to perform XP
LUN Configuration and
Security Manager Software
operation for non-Fibre port.
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10591005
6EFirst, add paths, and then
select Apply. Next, turn off
the security switch, and then
select Apply.
Security Switch Off operation
and path adding operation
cannot be performed
simultaneously. Check the
current configuration and
then make settings again.
10611005
6ECorrect the specified
contents, and request the
setting of the configuration
information again.
The specified WWN is
already in use. Specify
another WWN.
10631005
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
You are trying to register the
same WWN as the already
registered one. Check the
settings and request the
setting of the configuration
information again.
10641005
6ECorrect the specified
contents, and request the
setting of the configuration
information again.
The specified host name or
the host group name is
already registered. (The host
name and the host group
name cannot be the same.)
10651005
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
WWN number, which is not
registered, is specified.
(When deleting, or changing)
10661005
102 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes