HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
LU path is set to the releasing
expanded LU. (You need to
release the expanded LU and
path at the same time.)
10151005
2EThe specified port does not
exist. You have specified a
wrong port number. Or the
specified port type
(exclusively for mainframe)
cannot be processed in this
agent. The error does not
occur normally because it is
guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10181005
2ELUN is invalid. (The specified
value is not in the
specification.) The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10201005
2EThe specified volume does
not exist. (You have specified
wrong CU#:LDEV#) or the
LDEV (exclusively for
mainframe) cannot be
processed in this agent. The
error does not occur normally
because it is guarded in the
screen. Contact the program
maker.
An error occurred. If this
problem persists, call
technical support.
10211005
2EHost mode is invalid. (The
specified value is not in the
specification.) The error does
not occur normally because
it is guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10221005
2EIf this problem persists, call
technical support.
An error occurred. If this
problem persists, call
technical support.
10231005
2EFibre topology information is
invalid. (The specified value
is not in the specification.)
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10241005
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The specified LU path does
not exist.
10251005
XP Remote Web Console Error Codes 101