HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
Multiple volumes are
specified to a single port,
group or LUN combination.
10041005
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The following volumes cannot
be specified when you
change path configurations:
• Volumes that do not exist
• Volumes other than top
LUs in expanded LUs
• Volumes reserved by XP
Auto LUN
• Volumes to which the On
Demand Storage function
is applied
10051005
6ECheck the setting.Failed to remove the path.
The specified path is the last
path of the volumes used for
XP Continuous Access, XP
Business Copy, XP Flex Copy,
XP Auto LUN, or XP
Snapshot.
10071005
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The emulation type of the
volumes combined into a
LUSE volume is not for open
systems.
10091005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10101005
2EThe volume which links as an
expanded LU extend over
CU#. The error does not
occur normally because it is
guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10111005
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
LU path is set to a volume
which links as an expanded
LU.
10121005
2EThe emulation type of a
volume which links as an
expanded LU is not the same.
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
The emulation types of the
volumes combined into a
LUSE volume are not the
same.
10131005
100 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes