HP StorageWorks XP Performance Control user guide: HP XP12000 Disk Array, HP XP10000 Disk Array (T1605-96012, July 2009)

XP Performance Control user guide 81
B Limitations for storage partition administrators
If the user type of your user ID is storage partition administrator, you can use only XP Auto LUN and the
Export Tool from the XP Auto LUN programs. In this case, you cannot use XP Auto LUN or XP Performance
Control.
Also, when logging in as a storage partition administrator, the available functions of XP Auto LUN and the
Export Tool are limited. This appendix explains these limitations of XP Auto LUN and the Export Tool.
Limitations of XP Auto LUN
The XP Auto LUN functions that are limited when you logged in as a storage partition administrator are
shown in Table 28. For the XP Auto LUN pane displayed when logging in as a storage partition
administrator, see Figure 13.
Table 28 Limitations for storage partition administrators (XP Auto LUN)
Pane Limited function
Physical tab in the XP Auto LUN pane • The tree and list display only information in the SLPR (storage
management logical partition) allocated to the user ID.
• The XP Auto LUN button is not displayed (see Figure 13). Therefore,
the user cannot start Auto LUN XP.
LDEV tab in the XP Auto LUN pane The tree and list display only information in the SLPR allocated to the user
ID.
Port-LUN tab in the XP Auto LUN pane • The tree and list display only information in the SLPR allocated to the
user ID.
• The PFC button is not displayed (see Figure 13). Therefore, the user
cannot start XP Performance Control.
WWN tab in the XP Auto LUN pane The WWN tab is not displayed (see Figure 13). The user cannot view
traffics between host bus adapters and ports.
Cnt Ac Monitor pane
TCz Monitor pane
Cnt Ac-J Monitor pane
URz Monitor pane
These panes are not displayed (see Figure 13). The user cannot view
information about remote copy operations performed by XP Continuous
Access, TrueCopy for z/OS, XP Continuous Access Journal, and
Universal Replicator for z/OS.
Monitoring Options pane The Monitoring Options pane is not displayed (see Figure 13). The user
cannot start or stop monitoring, or change the gathering interval.