HP StorageWorks XP LUN Configuration and Security Manager User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1714-96030, June 2010)

NOTE:
• Sometimes Standard, High Speed, and Initiator/External MIX modes are collectively referred to
as Fibre PCB modes . PCB is an acronym for printed circuit board . The array documentation
sometimes uses the term PCB when referring to a channel adapter, which is a printed circuit board
used for connecting hosts and an array.
• Storage partition administrators cannot apply High Speed or Initiator/External MIX mode.
Table 2 Port serial numbers and names (4-port channel adapters)
High Speed or
Initiator/External
MIX mode
1
Standard mode
1
Port
serial
number
High Speed or
Initiator/External
MIX mode
1
Standard mode
1
Port
serial
number
CL2-ACL2-A128CL1-ACL1-A0
CL4-A [2-A 2nd]CL4-A129CL3-A [1-A 2nd]CL3-A1
––130––2
––131––3
––132––4
––133––5
––134––6
––135––7
CL2-CCL2-C136CL1-CCL1-C8
CL4-C [2-C 2nd]CL4-C137CL3-C [1-C 2nd]CL3-C9
––138––10
––139––11
––140––12
––141––13
––142––14
––143––15
CL2-ECL2-E144CL1-ECL1-E16
CL4-E [2-E 2nd]CL4-E145CL3-E [1-E 2nd]CL3-E17
––146––18
––147––19
––148––20
––149––21
XP LUN Configuration and Security Manager User Guide 31