HP StorageWorks XP LUN Configuration and Security Manager User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1714-96030, June 2010)
NOTE:
• In NAS environments, you can define up to 256 LU paths for one NAS port.
• In NAS environments, you cannot define LU paths to logical volumes that do not have the
Read/Write or Read/Write (S-VOL Disable) access attribute.
• You cannot define LU paths to LUN On-Demand volumes.
• You cannot define LU paths to volumes reserved by Auto LUN XP.
• The XP LUN Configuration and Security Manager Software pane displays two host groups (that
is, User and NAS-Sys) below each NAS port. When defining LU paths, you can use only User;
you cannot use NAS-Sys.
• You cannot define LU paths to volumes on which a volume management area (VMA) is set.
• You cannot define LU path to journal volumes.
• You cannot define LU path to virtual volumes.
• You cannot define LU path to pool volumes.
Overview of XP LUN Configuration and Security Manager Software22