HP StorageWorks XP LUN Configuration and Security Manager User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1714-96030, June 2010)

NOTE:
This unit can also be used for specifying the capacity of OPEN-V volumes.
• Block: Blocks. This unit is used for specifying the capacity of external LUs. For more information
about external LUs, see the HP StorageWorks External Storage XP user guide.
• Specify capacity and number: Used to specify the capacity and the number of CVs in the CVS
volume you want to create.
• Capacity: CVS volume's capacity in the unit selected in the Capacity Unit list. The available
capacity range (minimum - maximum) is shown below Capacity Unit (for example, 46 - 6720
MB, 50 - 7168 Cyl, or 315 - 8513 blocks).
• Number: Number of volumes of that size. The available range is shown on the right to the box
(for example, 1 - 489).
• Divide free space by number: Used to create CVS volumes by specifying the number of CVs in the
CVS volume to be created.
• Number: Number of CVs in the CVS volume. If you select this option, the available range is
shown on the right to the box (for example, 1 - 47).
• Divide free space by capacity: Used to create CVS volumes by specifying the capacity of CVs in
the CVS volume to be created.
• Capacity: Capacity of the CVS volumes to be created. The available capacity range (minimum
- maximum) is shown below Capacity (for example, 46 - 6720 MB, 50 - 7168 Cyl, or 315 -
8513 blocks).
• Set remaining space as volume: Used to create a CVS volume using the remaining space in the
VDEV.
NOTE:
This option is greyed out when there are two or more free spaces in the VDEV.
• Set: Displays the selected settings in the LDEV information table on the left.
• Delete: Deletes the settings from a the CVS volume selected in the LDEV information table.
• Clear: Deletes all the settings in the LDEV information table.
• Next: Opens the Make Volume pane (2). When no CV is set, no volume is made in the VDEV by
the Make Volume operation. In this case, this button displays a message, and returns to the Cus-
tomized Volume pane.
• Cancel: Cancels the selected settings, and returns to the Customized Volume pane.
Make Volume Pane (1) for other than OPEN-V
Figure 98 shows the Make Volume pane (1) for emulation types other than OPEN-V.
Custom Volume Size operations210