HP StorageWorks XP LUN Configuration and Security Manager User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1714-96030, June 2010)

NOTE:
If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity group
that consists of one or more virtual volumes (V-VOLs).
• Emulation: Emulation type of the CVS volume to be created.
• Capacity: CVS volume's capacity displayed in the unit selected from the Capacity Unit list in
the Install CV pane (1).
• CU:LDEV: CU:LDEV number of the CVS volume to be created.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the HP StorageWorks External Storage XP user guide .
NOTE:
If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume (V-VOL).
For more information about virtual volumes, see the HP StorageWorks Snapshot XP user guide .
• Back: Returns to the Install CV pane (2) or Install CV pane (3).
• OK: Registers the Install CV settings, and returns to the Customized Volume pane.
• Cancel: Cancels the Install CV settings, and returns to the Customized Volume pane.
Make Volume pane
Make Volume pane (1) for OPEN-V
Figure 97 shows the first Make Volume pane that appears when the selected emulation type is OPEN-V.
Custom Volume Size operations208