HP StorageWorks XP LUN Configuration and Security Manager User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1714-96030, June 2010)

NOTE:
An error occurs if volumes selected as targets of the Volume to Space function include a volume that
cannot be processed by the Volume to Space function (see Volume Manager guidelines).
Figure 91 Volume to Space Confirmation pane
.
• VDEV information table: Displays information about volumes that will be converted to space areas.
• VDEV: Set of a disk group, parity group, and VDEV number.
NOTE:
If a VDEV number starts with E (for example, E1-1-(1)), the parity group consists of one or
more external LUs.
• CU:LDEV: CU and LDEV numbers.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the HP StorageWorks External Storage XP user guide .
• Emulation: LDEV's emulation type.
• Capacity: Volume capacity in the unit selected from the Capacity Unit list in the Customized
Volume pane (Figure 90).
• OK: Registers information about volumes in the setting list as data for the Volume to Space opera-
tion.
• Cancel: Cancels the Volume to Space operation.
Install CV pane (1)
Use this pane to define and install one or more CVS volumes under an existing volume. You can
specify the emulation type and capacity of the CVS volume you want to create.
XP LUN Configuration and Security Manager User Guide 199