HP StorageWorks XP LUN Configuration and Security Manager User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1714-96030, June 2010)

NOTE:
An open-system volume's management area capacity is expressed in kilobytes.
Table 27 Boundary value for RAID levels
Boundary value
for RAID6 (6D+2P)
Boundary value
for RAID5 (7D+1P)
Boundary value
for RAID5 (3D+1P)
Boundary value
for RAID1
(2D+2D)
Emulation type
2,3042,6881,1527683380-xx
2,7843,2481,3929283390-xx
2,3042,6881,152768
OPEN-xx (except for
OPEN-V)
3,0723,5841,5361,024OPEN-V
NOTE:
• The xx is a variable indicating one or more numbers or letters.
• Boundary values are expressed in kilobytes.
• Boundary values of external LUs are always one kilobyte, regardless of RAID levels.
Table 28 Slot capacities
Slot capacityEmulation type
483380-xx, NF80-xx
583390-xx
48OPEN-xx (except for OPEN-V)
256OPEN-V
NOTE:
• The xx is a variable indicating one or more numbers or letters.
• Slot capacity is expressed in kilobytes.
Volume Initialize and Make Volume functions
You can initialize a CVS volume using one of the following functions: Volume Initialize or Make
Volume.
The Volume Initialize operation de-installs all variable-sized volumes under a CVS volume, and reformats
the CVS volume as a normal volume (FV). You must assign CU and LDEV numbers to the new formatted
FV. Any existing FVs on the original VDEV are not reformatted.
XP LUN Configuration and Security Manager User Guide 171