HP StorageWorks XP LUN Configuration and Security Manager User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1714-96030, June 2010)

7. Click OK. Settings are applied to the array.
Deleting a host's user information (Fibre Channel environments)
1. Start XP LUN Configuration and Security Manager Software, and display the Authentication pane
(Figure 31).
2. In the Port tree, expand the Fibre folder, and select the port or host group on which the user
information you want to delete is registered. The user information for hosts currently registered
on the selected port or host group appears in the Authentication Information (Host) list.
3. In the Authentication Information (Host) list, right-click the user information item you want to delete,
and select Delete User Information. The Delete Authentication Information pane appears.
Figure 65 Delete Authentication Information pane
.
4. Click OK.
5. Click Apply. A confirmation message appears.
6. Click OK. Settings are applied to the array.
Specifying a host group's user information (when performing mutual
authentication)
To perform mutual authentication, you must specify user information for host groups on array's ports.
Specify unique user information for each host group. You can change the specified user information
for host groups the same way you specified them initially.
1. Start XP LUN Configuration and Security Manager Software and display the Authentication pane
(Figure 31).
2. In the Port tree, select the port or host group whose user information you want to specify. Currently
registered user information for the selected port or host group appears in the Authentication
Information (Target) list.
XP LUN Configuration and Security Manager Software operations130