HP StorageWorks XP LUN Configuration and Security Manager User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1714-96030, June 2010)

2. In the Package tree, select the iSCSI folder. The Port table displays a list of iSCSI ports in the
array.
NOTE:
If you specify a channel adapter in the Package tree, the Port table displays only ports in
the specified channel adapter.
3. In the Port table or Select a Port list, select an iSCSI port. The iSCSI port's current configuration
appears below the Select a Port list.
4. To make settings on the iSCSI port, edit items below the list. For more information about the items,
see iSCSI port and iSNS server settings.
NOTE:
Use the vertical scroll bar to view all items.
5. Click Set. A confirmation message appears.
6. Click OK. Settings are applied to the Port table, but not to the array. Changes appear in blue.
7. Click Apply. A confirmation message appears.
8. Click OK. Settings are applied to the array.
Making settings on iSNS servers
You can register iSCSI ports to the iSNS server by clicking Register or delete iSCSI ports from the
iSNS server by clicking Delete.
1. Start XP LUN Configuration and Security Manager Software, and display the Port pane (Figure
22).
XP LUN Configuration and Security Manager User Guide 123