HP StorageWorks XP LUN Configuration and Security Manager User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1714-96030, June 2010)

Figure 56 Alternate Paths pane
.
NOTE:
The Group ID column indicates the host group's group numbers (G-IDs).
Using XP Secure Manager
To protect mission-critical data in the array from illegal access, you must secure the logical volumes
in the array. Use XP LUN Configuration and Security Manager Software to secure LUs from illegal
access by enabling XP Secure Manager on ports. For more information, see Configuring LUN security.
By default, XP Secure Manager is disabled on each port. When configuring the system, you must
enable XP Secure Manager on ports.
NOTE:
• You cannot apply XP Secure Manager to NAS ports.
• If a port has the External attribute, you cannot apply XP Secure Manager to the port.
Enabling XP Secure Manager
NOTE:
• You cannot apply XP Secure Manager to NAS ports.
• If a port has the External attribute, you cannot apply XP Secure Manager to the port.
XP LUN Configuration and Security Manager Software operations116