HP StorageWorks XP LUN Configuration and Security Manager User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1714-96030, June 2010)

5. Right-click the selection, and select Release LU Path. A confirmation message appears.
Figure 45 Information about LU paths to be deleted (Fibre Channel environments)
.
Figure 46 Information about LU paths to be deleted (iSCSI environments)
.
6. Click OK. The selected LU path is removed from the table.
7. Click Apply. A confirmation message appears.
8. Click OK. Settings are applied to the array, and the specified LU paths are deleted.
NOTE:
If you delete numerous paths at one time, the deletion process might take time and the pane
might seem to hang temporarily.
XP LUN Configuration and Security Manager User Guide 101