HP StorageWorks XP External Storage user guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (T1706-96017, June 2010)

7. To allocate external storage groups to a CLPR:
a. Double-click the SLPR.
b. Select the CLPR that you want to assign the external storage groups from (this will be CLPR0
if this is the first time you are configuring partitioning).
c. Select and right-click the external storage groups that you want to assign to another CLPR,
and then select Cut (Figure 25).
Figure 25 Partition Definition pane, Cut option
.
d. Right-click the CLPR that you want to assign the selected external storage groups to, and
then select Paste Parity Group (Figure 26). The selected external storage groups are added
to the CLPR resource list.
XP External Storage Software User Guide 63