HP StorageWorks XP External Storage user guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (T1706-96017, June 2010)

NotesStorage array
• In XP External Storage panes, the array is a “10000”.
• Alternate paths are in Multi mode.
SANRISE H10000 subsystem
• In XP External Storage panes, the arrays appear as “1024” and
“128”, respectively.
• Alternate paths are in Multi mode.
SANRISE H1024/H128 subsystem
• In XP External Storage panes, the arrays appear as “512” and
“48”, respectively.
• Alternate paths are in Multi mode.
SANRISE H512/H48 subsystem
• In XP External Storage panes, the array is a “256”.
• Alternate paths are in Multi mode.
SANRISE H256 subsystem
For specific supported storage arrays, contact your HP account support
representative.
IBM Storage Subsystem
For specific supported storage arrays, contact your HP account support
representative.
EMC Storage Subsystem
For specific supported storage arrays, contact your HP account support
representative.
Fujitsu Storage Subsystem
For specific supported storage arrays, contact your HP account support
representative.
NEC Storage Subsystem
CAUTION:
For more information about alternate path modes, see “Setting alternate paths for external
LUs” on page 104.
Contact your HP account support representative for the latest external array and FC switch support
matrix.
XP External Storage requirements
Table 2 XP External Storage requirements
RequirementItem
• XP Command View Advanced Edition Software version 2.0 or later,
or Remote Web Console
• HP StorageWorks XP LUN Configuration and Security Manager (for
setup)
• HP StorageWorks XP RAID Manager version 01.12.06 or later (if HP
StorageWorks XP Business Copy is used)
Required products
60 per port
Maximum number of connected
external disk arrays
XP External Storage Software User Guide 21