HP StorageWorks XP External Storage user guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (T1706-96017, June 2010)

Figure 50 VMA Information pane
.
• Vendor
External array's vendor.
• Product
External array's product name.
• LUN
LU number of the external LU.
• Attribute
Select from the following access attributes:
• Read/Write: Read and write operations can be performed on the volume.
• Read Only: Only read operations can be performed on the volume.
• Protect: You cannot access the volume. Read and write operations cannot be performed.
• S-Vol
Indicates whether or not the volume can be specified as an S-VOL: Enable or Disable.
• Reserved
Indicates whether XP RAID Manager and XP Command View Advanced Edition Software or Remote
Web Console can be used to make LU path and command device settings.
• Hyphen (-): You can use XP RAID Manager and XP Command View Advanced Edition Software
or Remote Web Console to make LU path and command device settings.
• RAID Manager: You can use XP RAID Manager to make LU path and command device settings,
but cannot use XP Command View Advanced Edition Software or Remote Web Console.
• Retention Term
Period (in days) when you cannot change the Attribute field to Read/Write.
• Mode
Mode the XP RAID Manager user assigns to the logical volume.
• Zer: Zero Read Cap mode is assigned to the logical volume.
• Inv: Invisible mode is assigned to the logical volume.
• Zer/Inv: Zero Read Cap and Invisible mode are assigned to the logical volume.
• Hyphen (-): The XP RAID Manager user has not assigned a mode to the logical volume.
XP External Storage Software User Guide 103