HP StorageWorks XP Business Copy User Guide: HP XP12000 Disk Array HP XP10000 Disk Array HP 200 Storage Virtualization System (T1713-96028, June 2010)

Corrective ActionDescriptionError Code
Retry after refreshing the screen.The specified P-VOL number does not exist.1030
Check pair status.
The specified P-VOL has been set as a Reserve
volume.
1031
Delete any pairs formed by the P-VOL.
No more pairs can be created for the specified
P-VOL.
1032
Check pair status.The specified P-VOL is not really a P-VOL.1033
Check pair status.The specified P-VOL has been set as a BC S-VOL.1037
Check pair status.
The Pairresync command was issued to a device
in the SMPL status.
103A
Confirm a pair condition.
It is impossible to make a pair because volume
that was specified as S-VOL is root volume
already.
103B
Confirm a pair condition.
It is impossible to make a pair because volume
that was specified as S-VOL is node volume
already.
103C
After making L1 pair a split condition, re-
execute.
It is impossible for L2 pair to require a split be-
cause L1 pair is not in the split condition.
103D
Place the BC pair in SMPL status, or place
the Continuous Access XP pair that uses the
BC S-VOL as a P-VOL in SMPL status.
A new pair was created with a P-VOL forming
the CA cooperation pattern.
103E
Place the Continuous Access XP pair that
uses the BC S-VOL as a P-VOL in PSUE or
SMPL status.
A pair status cannot be changed to form the CA
cooperation pattern.
103F
Set one or more Reserve volumes.The specified S-VOL does not exist.1040
Confirm a matching condition.S-VOL is used as destination volume for HIHSM.1042
Check pair status.
The specified S-VOL number has already been
used as that of an S-VOL.
1043
Check pair status.The specified S-VOL is not a BC S-VOL.1044
Delete the Continuous Access XP pair.
The specified secondary volume is being used
as a CA P-VOL.
1046
Delete the Continuous Access XP pair.
The specified secondary volume is being used
as a CA S-VOL.
1047
Check the pair status.
The specified secondary volume is being used
as a BC P-VOL.
104A
Confirm a matching condition.S-VOL is used as source volume for HIHSM.104B
Delete the Continuous Access XP pair.
The volume specified as a Reserve volume is
being used as a CA P-VOL.
104E
Delete the Continuous Access XP pair.
The volume specified as a Reserve volume is
being used as a CA S-VOL.
104F
XP Business Copy User Guide 89