HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Format operation
NOTE:
This log information indicates the completion of Format operation and does not indicate the completion
of Format processing. The Format processing requires some time. The status of the LDEV will change
when the Format Processing is completed.
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Format,,Normal end,Seq.=xxxxx
+PG=[1-1],Num. of PGs=1
+PG=[E1-1],Num. of PGs=1 –> in case of an external volume
+PG=[V1-1],Num. of PGs=1 –> in case of a vertual volume
+LDEV=[0x00-0x01],Num. of LDEVs=1
[Install]
Install function
Format
Format operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 60 Detailed information for Format operation
DescriptionItem
The parity group number.PG
The number of parity groups.Num. of PGs
The LDEV number.LDEV
The number of LDEVs.Num. of LDEVs
NOTE:
The status of the LDEV will not change directly after the execution of LDEV operation command.
Therefore, an error may occur after the execution of the command.
XP Audit Log reference guide 99