HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 42 Detailed information for Add iSCSI Target operation
DescriptionItem
The name of the port where the iSCSI Target has been added.Port
The host group number where the iSCSI Target has been added.HostGrpID
The iSCSI Target name added.Target name
The alias of the iSCSI Target name added.Alias
The host mode set.Mode
The host mode option set.Option
The iSCSI name added.iSCSI name
The iSCSI nickname added.Name
The number of WWNs added.Num. of WWNs
The number of iSCSI Target added.Num. of iSCSI Targets
Add LU Path operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Add LU Path,,Normal end,Seq.=xxxxx
+{Port,HostGrpID,LUN,CU:LDEV}=[{XX,0xXXX,0xXXX,0xXX:0xXX},{XX,0xXXX,0xXXX,0xXX:0xXX},
{XX,0xXXX,0xXXX,0xXX:0xXX}],Num. of Paths=3
[Install]
Install function
Add LU Path
Add Logical Unit (LU) Path operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 43 Detailed information for Add LU Path operation
DescriptionItem
The name of the port where the host group is created.Port
The host group number linked to the logical volume.HostGrpID
XP Audit Log reference guide 87