HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Alter is the selected parameter for example 1 and Error Reset is the selected parameter for example
2. This operation uses the following parameters, as shown in the following table.
Table 38 Alter and Error Reset Parameters for Threshold Value operation
DescriptionParameter
Change the threshold of failed PDEV (physical device).Alter
Indicates Error Reset.Error Reset
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 39 Detailed information for Threshold Value operation
DescriptionItem
The period of time to acquire the result of threshold diagnosis using the read
diagnosis function.
7days: 7 days, Total: Every operating days
Type
The mounting location of PDEV (physical device) that is the target of Alter or error
reset.
PDEV
The number of PDEVs (physical devices).Num. of PDEVs
XP Audit Log reference guide 83