HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The number of the logical volume(s) where the attribute has been set.Num. of LDEVs
* When bit 5, 6, and 7 are all 0 (zero), Read/Write has been set.
Expiration Lock operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LSE],Expiration Lock,SLPR#xx:Enable,
Normal end,Seq.=xxxxx
[LSE]
LUN Security Extension function
Expiration Lock
Expiration Lock operation
SLPR#xx:Enable
SLPR#xx: Enable is selected as the parameter. The operation uses the following parameters, as shown
in the following table.
Table 27 Parameters for Expiration Lock operation
DescriptionParameter
The expiration lock setting is enabled for SLPR number xx.SLPR#xx:Enable
The expiration lock setting is disabled for SLPR number xx.SLPR#xx:Disable
The expiration lock setting is enabled in the storage system.SYSTEM:Enable
The expiration lock setting is disabled in the storage system.SYSTEM:Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Release All Extents operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[LSE], Release All Extents,,Normal end,Seq.=xxxxx
+{CU:LDEV,Operation,Result}=[{0x00:0x00,0x80,Normal end},
{0x01:0x01,0x80,Error(9605-58435)},{0x02:0x02,0x80,Normal end}],Num. of LDEVs=XXX
[LSE]
LUN Security Extension function
Release All Extents
Release All Extents operation
Normal end
The operation has ended normally.
LUN Security XP Extension function74