HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

[Cache]
Cache function
Set M/F DCR
Set M/F DCR operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 19 Detailed information for Set M/F DCR operation
DescriptionItem
The CU and LDEV numbers of the logical volume (for a mainframe system) where
the setting information of Cache Residency cache is added or changed.
CU:LDEV
The setting mode of Cache Residency cache.
Bind: Bind, Priority: Priority
Mode
The prestaging target.
No: No (disables the prestaging mode)
Yes: Yes (enables the prestaging mode)
Prestaging
The starting cylinder number (CC) and the starting head number (HH) of the data
resident in Cache Residency cache.
Start CC-HH
The ending cylinder number (CC) and the ending head number (HH) of the data
resident in Cache Residency cache.
End CC-HH
The number of the logical volume (for a mainframe system) where the setting inform-
ation of Cache Residency cache was added or changed.
Num. of LDEVs
Set Open DCR operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Cache],Set Open DCR,,Normal end,Seq.=xxxxx
+{CU:LDEV,Mode,Prestaging,Start LBA,End LBA}=[{0x00:0x00,Bind,No,XXXXXXXXXXXXXXXX,
XXXXXXXXXXXXXXXX}],Num. of LDEVs=1
[Cache]
Cache function
Set Open DCR
Set Open DCR operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
XP Audit Log reference guide 65