HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

6 BASE function
ChangeMode operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[Base],ChangeMode,Modify,Normal end,Seq.=xxxxxx
[Base]
BASE function
ChangeMode
ChangeMode operation
Modify
Modify is the selected parameter. This operation uses the following parameters, as shown in the
following table.
Table 15 Parameters for ChangeMode operation
DescriptionParameter
Change to Modify modeModify
Change to View modeView
Change to View mode was requested by the RMI server at log-outView_Logout
When the Modify mode takes timeout or time-out occurs because of no
response from the client, change to the View mode is requested by RMI
server.
View_TimeOut
Change to View mode is forcefully requested.View_Forced
Change to View mode is forcefully requested to all users.View_Forced_All
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Set System Info operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[BASE],Set System Info,,Normal end,Seq.=xxxxxx
+{Name,Contact,Location}=[{xxxx,xxxx,xxxx}],Num. of SystemInfo=1
[Base]
BASE function
XP Audit Log reference guide 61