HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

NOTE:
The detailed information is not displayed if you do not change settings.
Table 12 Detailed information for Set Syslog Server operation
DescriptionItem
Indicates whether to output detailed information to the syslog server.
Enable: Output detailed information. Disable: Do not output detailed information.
DetailFlg
The location identification information of the storage system.Locationinfo
The syslog server to which syslog information is output.
Primary: Primary syslog server. Secondary: Secondary syslog server.
ServerType
Version number of the internet protocol. A hyphen (-) is displayed if you do not change
the setting.
IPv6: Internet Protocol Version 6 (not supported). IPv4: Internet Protocol Version 4
IPAddrVer
Indicates whether to transfer the syslog information to the syslog server. A hyphen (-)
is displayed if you do not change the setting.
Enable: Transfer syslog information. Disable: Do not transfer syslog information.
OutFlg
The IP address to which the syslog information is sent. A hyphen (-) is displayed if you
do not change the setting.
ServAddr
The port number of the LAN when sending the syslog information. A hyphen (-) is
displayed if you do not change the setting.
ServPortNum
SIM Complete operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[AuditLog], SIM Complete,,Normal end,Seq.=xxxxx
+Reference Code=[0x7C0300],Num. of Reference Codes=1
[Audit Log]
Audit Log function
SIM Complete
Service Information Message (SIM) Complete operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Audit Log function56