HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

PriorityTarget of operationOperation
3Host GroupChange
3WWN
3Changing Host Mode
4Command Device
4Command Dev. Security
OFF: 3LUN Security
ON: 1
If the priority is the same, the log information is output in the order of the operations performed.
If you perform the following operations at the same time, the following happens:
• Add –> Delete: The operations cancel each other and no log information is output.
• Change –> Delete: Log information is output for the Delete operation.
• Change 1 –> Change 2: Log information is output for the Change 2 operation.
• Add –> Change: Log information is output as an Add operation, but the contents of the setting are
output according to the setting of the Change operation.
If you have deleted a host group, the following operations performed for that Host Group are not
output as log information:
• Changing host mode
• Changing Host Group
• Adding or deleting paths
• Adding, changing, or deleting WWN
Note 4
When you set two or more port settings, the following conditions apply:
• When you perform two or more operations for one target, the log information is output as one
entry.
• The log information is output in the order of the operations performed.
• If you perform the following operations at the same time, the following happens:
Change 1 –> Change 2: Log information is output for the Change 2 operation.
Note 5
When you set two or more LUSE settings, the following conditions apply:
• When you perform two or more operations for one target, the log information is output as one
log information file. For example, if you have created one LUSE volume and then created another
LUSE volume using the previously-created LUSE volume, the log information is output just as Make
LUSE.
• The log information is output in the order of the operations performed.
• If you perform the following operations at the same time, the following happens:
• Create LUSE volume –> Delete LUSE volume: The operations cancel each other, and the log
information is not output.
XP Audit Log reference guide 327