HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed information displays for this operation, as shown in the following table.
Table 286 Detailed information for Pool SIM Comp Req operation
DescriptionItem
The reference code of the Service Information Message (SIM) generated in the storage
system with resolved errors or service request status.
0xXXXXXX: Reference code of the SIM
SIM
The number of SIMs with resolved errors and service request status.Num. of SIMs
Set Pool operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VVOL], Set Pool,,Normal end,Seq.=xxxxx
+{Pool ID, Pool Type, Threshold(%), Pool Result}=[{ 1,20% , Normal end }] Num of Pool = 1
++{ CU:LDEV, LDEV Result} =[{0x00:0x00 , Normal end}, {0x01:0x00 , Normal end},{0x02:0x00 , Normal end},
{0x03:0x00 , Normal end}] Num. of LDEVs = 3
[VVOL]
V Volume function
Set Pool
Set Pool operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 287 Detailed information for Set Pool operation
DescriptionItem
The pool ID of the created pool.Pool ID
The pool type. 1 is always output.Pool Type
The threshold value of the usage rate of the created pool.
The unit is percent (%).
Threshold(%)
The result of pool creation.
Normal end: Normal end, Error(xxxx-yyyy): Abnormal end, Not Execute: Not
Executed
xxxx: Part code, yyyy: Error code
Pool Result
The number of the created pool.Num of Pool
The CU number and the LDEV number of the pool volume.CU:LDEV
XP Audit Log reference guide 305