HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 284 Detailed information for Pool Change/Delete operation
DescriptionItem
The operation to the pool.
Change: Changing pool information
Delete: Delete pool
Command
The pool ID of the pool where the settings have been changed or the number of the
pool that have been deleted.
Pool ID
The pool type. 1 is always output.
This index is output only when pool information is changed.
Pool Type
The threshold value of the usage rate of the pool.
The unit is percent (%).
This index is output only when pool information is changed.
Threshold(%)
The result of the operation.
Normal end: Normal end, Error(xxxx-yyyy): Abnormal end, Not Execute: Not
Executed
xxxx: Part code, yyyy: Error code
Result
The number of the pool where the settings have been changed or the number of the
pool that have been deleted.
Num. of Data
Pool Initialize operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[VVOL], Pool Initialize,,Normal end,Seq.=xxxxx
[VVOL]
V Volume function
Pool Initialize
Pool Initialize operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
XP Audit Log reference guide 303