HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

40 V Volume (VVOL) function
Add V-Vol operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VVOL],Add V-Vol,,Normal end,Seq.=xxxxx
+{V-VOL Group,Capa(blocks),CLPR,Type,Result}={{V1-1,4294967296,0,OPEN-V,Normal end},
++{CU:LDEV,Capa(MB),SSID}={0x03:0x00,3287040,0x20},Num. of LDEVs=xxx
+Num. of V-VOL Groups=xxx
[VVOL]
V Volume function
Add V-Vol
Add V-Vol operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 282 Detailed information for Add V-Vol operation
DescriptionItem
The V-VOL group ID of the created V-VOL group.V-VOL Group
The capacity of the created V-VOL group.
The unit is block.
Capa(blocks)
The CLPR number of the created V-VOL group.CLPR
The emulation type of the created V-VOL group.Type
The result of the operation.
Normal end: normal end,
Error(xxxx-yyyyy): abnormal endxxxx: part code, yyyyy: error code
Result
The CU and LDEV numbers of the created virtual volume.CU:LDEV
The capacity of the created virtual volume.
The unit is megabyte (MB).
Capa(MB)
The SSID.SSID
XP Audit Log reference guide 301