HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed information for this operation is shown in the following table.
Table 281 Detailed information for Set Group operation
DescriptionItem
The security group name.Security Group
The host group name.Host Group
The LDEV group name.LDEV Group
The setting status of the security set to the security group.
Enable, Disable
Security
The attribute of the security group.
Access: Access attribute, Pool: Pool attribute
Attr
Indicates whether the logical volume in the security group can be used as
a primary volume in the remote copy destination.
Enable: Used as primary volume,
Disable: Not used as primary volume
RsvVol
The number of security groups.Num. of Security Groups
The host information.Host
The type of the host.Type
The model number of the host.Model
The node ID of the host.SeqNo
The logical partition number of the host.LPAR
The manufacturer of the host.
CNT(EX): Channel extender, HTC: Hitachi, IBM: IBM, FJT: Fujitsu
Attr
The number of hosts.Num. of Hosts
The port name registered in the host group.Port
The number of ports registered.Num. of Ports
The number of host groups.Num. of Host Groups
The CU number registered in the LDEV group.CU
The LDEV numbers registered in the LDEV group.LDEV
The number of LDEVs registered.Num. of LDEVs
The number of LDEV groups.Num. of LDEV Group
Volume Security (VSEC) function300