HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The number of manual migration plans set and deleted.Num. of LDEVs
Set Plan Condition operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VM],Set Plan Condition,,Normal end,Seq.=xxxxxx
+{SetType,StartTime,TimeRequiredMax(min.),AvailablityMax(%),VolumeMax}= [{Default,24:00,120,100,65535}]
Num. of Data = 1
[ALUN]
Auto LUN function
Set Plan Condition
Set Plan Condition operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 276 Detailed information for Set Plan Condition operation
DescriptionItem
The operation executed.
• Default: A default auto migration plan is applied. (Click Set after clicking
Default.)
• Customize: A customized auto migration plan is applied. (Click Set after
changing parameters of Auto Plan Parameters.)
SetType
The time when the auto migration will start.StartTime
The time limit for the auto migration.
This value is indicated by the number from 10 to 120. The unit is minute.
TimeRequiredMax(min.)
The disk usage limit during auto migration.
This value is indicated by the number from 10 to 100. The unit is percent (%).
AvailabilityMax(%)
The maximum number of volumes that can be migrated concurrently.
This value is indicated by the number from 1 to 40.
VolumeMax
The number of settings. 1 is always output.Num. of Data
Auto LUN (ALUN) function292