HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed information for this operation is shown in the following table.
Table 274 Detailed information for Set Fixed PG operation
DescriptionItem
The operation executed to the parity group.
Set: Fixed parity group setting
Release: Normal parity group setting
Type
The ID of the parity group whose setting has been changed.PG
The number of parity groups whose setting has been changed.Num. of PGs
Set Migration Vol operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VM],Set Migration Vol,,Normal end,Seq.=xxxxxx
+{Instruction,SourceLDEV,TargetLDEV,OwnerID,Result}=[{Create,0x00:0x00,0x00:0x01,0xFF,
Normal end},{ Create,0x00:0x02,0x00:0x03,0xFF, Error(XXXX-YYYY) end },{ Create,0x00:0x04,
0x00:0x05,0xFF,Normal end},{ Create,0x00:0x06,0x00:0x07,0xFF, Error(XXXX-YYYY) end }]
Num. of LDEVs =4
[ALUN]
Auto LUN function
Set Migration Vol
Set Migration Vol operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 275 Detailed information for Set Migration Vol operation
DescriptionItem
Indicates that the manual migration plan is set or deleted; Create: Set, Delete: DeletedInstruction
The logical volume ID of the migration source. The number before the colon is a CU
number and that after the colon is an LDEV number.
SourceLDEV
The logical volume ID of the migration target. The number before the colon is a CU
number and that after the colon is an LDEV number. This value is output only when
the manual migration plan is set.
TargetLDEV
The program which set this migration plan; for Volume Migration, 0x00 is output.
For a program other than Volume Migration, the ID that The product is output.
OwnerID
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
XP Audit Log reference guide 291