HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 272 Detailed information for Set Auto Plan Param operation
DescriptionItem
The operation executed.
• Default: A default auto migration plan is applied. (Click Set after clicking Default.)
• Customize: A customized auto migration plan is applied. (Click Set after the user
changes the parameters of Auto Plan Parameters.)
SetType
Indicates whether the auto migration function is enabled or disabled.
Enable: Setting is enabled, Disable: Setting is disabled.
PlanSwitch
The sampling term set.
• None: no setting
• Every day
• Once every X days (see PlanDay index for an X value)
• Once a week
• Once a month
PlanType
The setting value of the sampling term. The output depends on the sampling term output
in PlanType.
If the sampling term is:
• None: no output
• Every day: no output
• Once every X days: the number of days of the interval for sampling is output.
• Once a week: the specified day of the week is output (SUN: Sunday, MON: Monday,
TUE: Tuesday, WED: Wednesday, THE: Thursday, FRI: Friday, SAT: Saturday).
• Once a month: the specified date is output (a number from 1 to 31).
PlanDay
The period of time for sampling. The left of the hyphen (-) represents the start time and
the right represents the end time.
MonitorPeriod
The number of the sampling points (the range of the usage rate data analyzed by the
auto migration function).
All: All sampling points
xx: Sampling points up to upper xx. xx is the number from 1 to 96
SampleCount
The number of settings. 1 is always output.Num. of Data
Set Class Threshold operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[VM],Set Class Threshold,,Normal end,Seq.=xxxxxx
+{ClassName,AvailabilityMax(%)}=[{A,100},{B,100},{C,100},{D,100},{E,100},{F,100}]
Num. of Classes = 6
XP Audit Log reference guide 289