HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed information for this operation is shown in the following table.
Table 267 Detailed information for Set SSID operation
DescriptionItem
The SSID number.
NOTE:
The SSID specified when Volume Initialize or Make Volume is executed
is also output.
SSID
The starting CU number and LDEV numbers.Start CU:LDEV
The number of SSIDNum. of SSIDs
Volume Initialize operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[VLL],Volume Initialize,,Normal end,Seq.=xxxxxx
+{PG,CU:LDEV}=[{XX-XX-(X),0xXX:0xXX},{XX-XX-(X),0xXX:0xXX}],Num. of PGs=2
[VLL]
Virtual LVI / Virtual LUN function
Volume Initialize
Volume Initialize operation
No parameter or Non Format
No parameter is selected. This operation uses the following parameters, as shown in the following
table.
Table 268 Parameters for Volume Initialize operation
DescriptionParameter
Formatted Volume Initialize.No parameter
Unformatted Volume Initialize.Non Format
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Virtual LVI / Virtual LUN (VLL) function284