HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The slot number.
NOTE:
A hyphen (-) is output when not specified.
SLOT
The emulation type.Emulation
The user-specified capacity.Size
The unit of the CV capacity.
NOTE:
The output unit is different according to the setting.
KB: For open-system volume
Cyl: For mainframe volume
LBA: For external volume
Unit
The number of LDEVs.Num. of LDEVs
Make Volume operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VLL],Make Volume,,Normal end,Seq.=xxxxxx
+[PG,CU:LDEV,Emulation,Size,Unit]=[{X-X-(X),0xXX:0xXX,OPEN-V,XXXXXXXXXXXXXXXX,KB},
{X-X-(X),0xXX:0xXX,OPEN-V,XXXXXXXXXXXXXXXX,KB}],Num. of LDEVs=2
[VLL]
Virtual LVI / Virtual LUN function
Make Volume
Make Volume operation
No parameter or Non Format
No parameter is selected. This operation uses the following parameters, as shown in the following
table.
Table 265 Parameters for Make Volume operation
DescriptionParameter
Formatted Make Volume.No parameter
Unformatted Make Volume.Non Format
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Virtual LVI / Virtual LUN (VLL) function282