HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Disconnect-Volume operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[EXS],Disconnect-Volume,,Normal end,Seq.=xxxxxx
+{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End},
{E1-4,Normal End}],Num of Groups=XXX
[EXS]
External Storage function
Disconnect-Volume
Disconnect-Volume operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 261 Detailed information for Disconnect-Volume operation
DescriptionItem
The group number of the external volume that the path is restored.Group
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of external volumes resumed.Num. of Groups
NOTE:
The status does not change immediately even after you perform the Disconnect-Volume and Disconnect
Subsystem operation. As a result, errors may occur after you have performed the operation.
WwnTimer operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00, [EXS],WwnTimer,,Normal end,Seq.=xxxxxx
+{WWN,I/O-TOV,Quedepth,LinkDown,Result}=[{50060E8000C3E214,15,8,180,Normal End},
{50060E8000C3E214,15,8,180,Error(605-3003)},{50060E8000C3E214,15,8,180,Normal End},
Num of WWNs=XXX
[EXS]
External Storage function
WwnTimer
World Wide Name (WWN) Timer operation
Normal end
External Storage XP function278