HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

NOTE:
The status does not change immediately after you perform the Check-Paths operation. As a result,
errors may occur after you perform the operation.
ChkPath-RestoreVol operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[EXS],ChkPath-RestoreVol,,Normal end,
Seq.=xxxxxx
+{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End},
{E1-4,Normal End}],Num. of Groups=XXX
[EXS]
External Storage function
ChkPath-RestoreVol
ChkPath-Restore Vol operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 257 Detailed information for ChkPath-RestoreVol operation
DescriptionItem
The group number of the external volume that the path is restored.Group
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of external volumes resumed.Num. of Groups
NOTE:
The status does not change immediately after you perform the ChkPath-RestoreVol operation. As a
result, errors may occur after you perform the operation.
Delete-Lu (Force) operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00, [EXS],Delete-Lu(Force),,Normal end,Seq.=xxxxxx
+{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End},
{E1-4,Normal End}],Num of Groups=XXX
XP Audit Log reference guide 275