HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
Indicates whether the cache mode is enabled or disabled; Enable: Mode is en-
abled, Disable: Mode is disabled.
CM
The CLPR number of the CLPR set to be used to access the mapped external volume.CLPR
The emulation type of the mapped external volume.Type
The capacity of the volume used by Data Retention Utility.UsedCapa(blocks)
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The CU and LDEV numbers of the mapped external volume.CU:LDEV
The capacity of the mapped external volume.
The unit is megabyte (MB).
Capa(MB)
Indicates SSID.SSID
The number of mapped external volumes.Num. of LDEVs
The port name of the local storage system.Port
The WWN of the external storage system.
This index is output for the top WWN and the others are omitted.
- shows the WWN is the same as the top WWN.
WWN
The LUN of the external volume.LUN
The number of external volume groups set.Num. of Groups
Add-Wwn operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00, [EXS],Add-Wwn,,Normal end,Seq.=xxxxxx
+{WWN,Result}=[{50060E8000C3E214,Normal end},{50060E8000C3E214,Normal end},
{50060E8000C3E214,Normal end},{50060E8000C3E214,Error(605-8100)},
-{50060E8000C3E214,Error(605-8100)},{50060E8000C3E214,Normal end},Num of WWNs=xxx
[EXS]
External Storage function
Add-Wwn
Add-World Wide Name (WWN) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
External Storage XP function272