HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

34 External Storage XP function
Add-Lu2 operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[EXS],Add-Lu2,,Normal end,Seq.=xxxxxx
+{Vendor,Product,Serial,Dev,Dev-Name,D-Type,Capa(blocks),Group,IOSup,CM,CLPR,Type, UsedCapa(blocks),Result}=
{{HITACHI,9970V,28528,0001,DF600,0x0000,4294967296,E1-1,Enable,Disable,0,OPEN-V, 4294967296, Normal end},
++{CU:LDEV,Capa(MB),SSID}={0x03:0x00,3287040,0x20},Num. of LDEVs=xxx
++{Port,WWN,LUN}=[{1A,50060E8000C3E214,0x0001},{3A,-,0x0000},{7B,-,0x0000},{7B,-,0x0000},
{1A,-,0x0000},{3A,-,0x0000},{7B,-,0x0000},{7B,-,0x000}],
+Num. of Groups=xxx
[EXS]
External Storage function
Add-Lu2
Add Logical Unit (LU) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 253 Detailed information for Add-Lu2 operation
DescriptionItem
The vendor name of the external storage system with the mapped external volume.Vendor
The product name.Product
The serial number of the external storage system with the mapped external volume.Serial
The device identification number of the mapped external volume.Dev
The device name of the mapped external volume.Dev-Name
The external storage system information (Ex-Dev Info) of the mapped external
volume.
D-Type
The capacity of the mapped external volume by block.Capa(blocks)
The group number of the mapped external volume.Group
Indicates whether the I/O suppression mode is enabled or disabled; Enable:
Mode is enabled, Disable: Mode is disabled.
IOSup
XP Audit Log reference guide 271