HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed Information
Detailed information for this operation is shown in the following table.
Table 251 Detailed information for Suspend-Pair operation
DescriptionParameter
The CU and LDEV numbers of the primary data volume.P-VOL(CU:LDEV)
The CU and LDEV numbers of the secondary data volume.S-VOL(CU:LDEV)
The mirror ID.MirrorID
The serial number of the device (storage system).S/N
The controller ID.CTRLID
Indicates whether the split data volume is a primary or primary data volume.
P-VOL: Primary, S-VOL: primary
Type
Indicates whether writing to the primary volume is enabled or not.
Disable: Disabled, Enable: Enabled
S-VOL Write
The range to restore the pair.
Group: Group range, Volume: Volume range
Range
The suspend mode.
Purge: Purge mode, Flush: Flush mode
Suspend Mode
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of pairs.Num. of Pairs
System-Option operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[UR z/OS],System-Option,Normal end,Seq.=xxxxx
+Max Initial Copy=64
+{CU,Change SIM Report}=[{0x00,Report},{0x01,Not Report},{0x02,Not Report},
{0x03,Not Report},{0x04,Not Report},{0x05,Not Report}, (snip)
- (snip), {0x3F,Report}],Num of CUs=64
[UR z/OS]
Universal Replicator z/OS function (for IBM z/OS)
System-Option
System-Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Universal Replicator (UR) z/OS function268