HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed information for this operation is shown in the following table.
Table 250 Detailed information for Resume-Pair operation
DescriptionParameter
The CU and LDEV numbers of the primary data volume.P-VOL(CU:LDEV)
The CU and LDEV numbers of the secondary data volume.S-VOL(CU:LDEV)
The mirror ID.MirrorID
The serial number of the device (storage system).S/N
The controller ID.CTRLID
The priority of copy.Priority
The range to restore the pair.
Group: Group range, Volume: Volume range
Range
The master journal group number.M-JNLG
The restore journal group number.R-JNLG
The error level.
Group: Group level, Volume: Volume level
Error Level
Indicates the resync mode. Normal: normal resync, Delta: delta resync,
Return to standby: return to standby status
Resync Mode
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of pairs.Num. of Pairs
Suspend-Pair operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[UR z/OS(R)],Suspend-Pair,,Normal end,Seq.=xxxxxx
+{P-VOL(CU:LDEV),S-VOL(CU:LDEV),MirrorID,S/N,CTRLID,Type,S-VOL Write,Range,Suspend Mode,
Result}=[{0x00:0x00,0x20:0x00,0x00,65432,4,P-VOL,Disable,Volume,Flush,Normal end}, (snip)
-{0x00:0x02,0x20:0x00,0x02,65432,4,P-VOL,Disable,Volume,Flush,Normal end}],
{0x00:0x3,0x20:0x03,0x00,65432,4,P-VOL,Disable,Volume,Flush,Normal end},Num. of Pairs=4
[UR z/OS]
Universal Replicator z/OS function (for IBM z/OS)
Suspend-Pair
Suspend-Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
XP Audit Log reference guide 267