HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 249 Detailed information for Pair-Option operation
DescriptionParameter
The CU and LDEV numbers of the primary data volume.P-VOL(CU:LDEV)
The CU and LDEV numbers of the secondary data volume.S-VOL(CU:LDEV)
The mirror ID.MirrorID
The master journal group number.M-JNLG
The restore journal group number.R-JNLG
The error level. Group: Group level, Volume: Volume levelError Level
Indicates whether the setting to copy the CFW data to the remote volume is
enabled or not.
Only M-VOL: Copy to the main volume only is enabled.
Copy To R-VOL: Copy to the main and remote volume is enabled.
CFW
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of pairs.Num. of Pairs
Resume-Pair operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[UR z/OS(R)],Resume-Pair,,Normal end,Seq.=xxxxx
+{P-VOL(CU:LDEV),S-VOL(CU:LDEV),MirrorID,S/N,CTRLID,Priority,Range,M-JNLG,R-JNLG,
Error Level,Resync Mode,Result}=
[{0x00:0x00,0x20:0x00,0x00,65432,4,7,Volume,0x02,0x00,Group,Normal end}, (snip)
-{0x00:0x02,0x20:0x02,0x00,65432,4,7,Group,0x02,0x00,Group,Normal,Normal end}],
Num. of Pairs=2
[UR z/OS]
Universal Replicator z/OS function (for IBM z/OS)
Resume-Pair
Resume-Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Universal Replicator (UR) z/OS function266