HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Add is selected as the parameter. This operation uses the following parameters:
Table 243 Parameters for Edit-EXCTG operation
DescriptionItem
Add journal groups to the extended consistency group.Add
Remove journal groups from the extended consistency group.Remove
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 244 Detailed information for Edit-EXCTG operation
DescriptionItem
The number of the extended consistency group.EXCTG
The journal group number.JNLG
The mirror ID.MirrorID
The serial number of the device (disk storage system).S/N
The controller ID.CTRLID
The CU and LDEV number of the remote command device.Cmd.Dev.(CU:LDEV)
The result of the operation.
Normal end: normal end, Error(xxxx-yyyyy): abnormal end
xxxx: part code, yyyyy: error code
Result
The number of extended consistency groups for which the configuration has
been changed.
Num. of EXCTGs
Journal-Option operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[UR z/OS(R)],Journal-Option,,Normal end,
Seq.=xxxxx
+{JNLG,MetaData Ratio,Extent,Data Overflow Watch(s),Inflow Control,Copy Pace,Timer Type,
Path Watch Time,Forward Path Watch Time,Use of Cache,Speed of Line(Mbps),
Delta resync Failure,Result}=
-{0x00,32,32,20,No,150,Local,30(min.),Yes,Not Use,256,Entire,Normal end},(snip),
{0x02,32,32,20,No,150,Local,12(hour),Yes,Not Use,256,Entire,Normal end},Num. of JNL Grps=3
[UR z/OS]
Universal Replicator z/OS function (for IBM z/OS)
Journal-Option
Journal-Option operation
Universal Replicator (UR) z/OS function262