HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed information
Detailed information for this operation is shown in the following table.
Table 242 Detailed information for Delete-Pair operation
DescriptionItem
The port number, host group number and LUN of the primary data volume.P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the primary data volume.S-VOL(Port-G-ID-LUN)
The mirror ID.MirrorID
The serial number of the device (storage system).S/N
The controller ID.CTRLID
The primary and primary of the deleted volume.
P-VOL: Primary, S-VOL: primary
Type
The delete range.
Volume: Volume range, Group: Group range
Range
The delete mode.
Normal: Normal mode, Force: Force mode
Delete Mode
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of pairs.Num. of Pairs
Edit-EXCTG operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[UR z/OS(R)],Edit-EXCTG,Add,Normal end, Seq=xxxxx
+EXCTG=0x00
++{JNLG,MirrorID,S/N,CTRLID,Cmd.Dev.(CU:LDEV),Result}=[{0x00,0x01,65432,4,0x20:0x00,
Normal end},{0x01,0x01,65432,4,0x20:0x00,Normal end}]
+EXCTG=0x01
++{JNLG,MirrorID,S/N,CTRLID,Cmd.Dev.(CU:LDEV),Result}=[{0x00,0x01,65433,4,0x20:0x00,Normal end}]
+Num. of EXCTGs=2
[UR z/OS]
Universal Replicator z/OS function (for IBM z/OS)
Edit-EXCTG
Edit-Extended Consistency Group (EXCTG) operation
Add
XP Audit Log reference guide 261