HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The number of pairs.Num. of Pairs
Pairresync operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[CAXJ],Pairresync,,Normal end,Seq.=xxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),MirrorID,S/N,CTRLID,Priority,CTG,Range,M-JNLG,
R-JNLG,Error Level,Resync Mode,Result}=[{1A-0x00-0x000,5A-0x00-0x000,0x00,65432,4,32,0x05,
Group,Normal end}, (snip)
-{1A-0x00-0x001,5A-0x00-0x001,0x00,65432,4,32,0x05,Group,0x02,0x00,Group,Normal,
Normal end}],Num. of Pairs=2
[CAXJ]
Continuous Access Journal function
Pairresync
Pairresync operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 236 Detailed information for Pairresync operation
DescriptionItem
The port number, host group number and LUN of the primary data volume.P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the primary data volume.S-VOL(Port-G-ID-LUN)
The mirror ID.MirrorID
The serial number of the device (storage system).S/N
The controller ID.CTRLID
The priority of copy.Priority
The consistency group ID.CTG
The range to restore the pair.
Group: Group range, LU: LU range
Range
The master journal group number.M-JNLG
The restore journal group number.R-JNLG
The error level. Group: Group level, LU: LU levelError Level
XP Audit Log reference guide 253