HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Figure 4 Syslog tab
The Syslog tab has the following features:
• Output to Primary Server allows you to specify whether to transfer the audit log to the syslog
server.
• Click Enable to transfer the audit log to the primary syslog server.
• Click Disable if you do not want to transfer the audit log to the primary syslog server.
• Primary Server Setting allows you to set the following information for the primary syslog server,
if you have enabled the audit log transfer:
• IP Address allows you to enter the IP address. You do not need to enter the periods.
• Port Number allows you to specify a port number from 1 to 65,535.
• Output to Secondary Server allows you to specify whether to transfer the audit log to the syslog
server.
• Click Enable to transfer the audit log to the secondary syslog server.
• Click Disable to not transfer the audit log to the secondary syslog server.
• Secondary Server Setting: allows you to set the following information for the secondary syslog
server, if you have enabled the audit log transfer:
• IP Address allows you to enter the IP address. You do not need to enter the periods.
• Port Number allows you to specify a port number, from 1 to 65,535.
• Location Identification Name allows you to specify the name of the array from which you are
transferring the audit log file. The name can contain up to 32 one-byte characters, including the
following:
• letters (A-Z and a-z),
• numbers (0-9), and
• symbols (including ! " # $ % & ' ( ) = - ~ ^ | \ { } [ ] @ ` : ; * + _ ? / < > .).
IMPORTANT:
DO NOT use a comma (,) or a space.
XP Audit Log reference guide 25